Injection Molding
8 مشاهدة
PA66 burnt three factors
ظاهرة المشكلة
Product ends and rib positions are charred and underfilled, and carbon deposits yellow at corresponding mold positions
تحليل الأسباب
PA66 burning is caused by the superposition of three factors: melt temperature or mold temperature too high, injection speed and screw shear too strong, and poor venting; high-temperature shear plus gas trapping makes the local melt reach the ignition point
الحل
①Reduce barrel temperature and injection speed; ②Reduce screw speed to reduce shear heat; ③Add and clean vent grooves, reduce speed for end filling; after adjustment, take continuous samples to verify the effect, confirm stability before resuming mass production
الخلاصة الأساسية
Burning treatment investigates item by item according to the three factors of temperature, shear, and venting; most cases are the superposition of the three, and single-item adjustment is often not enough; after confirming effectiveness, fix the parameters and practices into the work instructions to prevent recurrence
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!