Injection Molding
4 مشاهدة
PESU Fast Injection Speed
ظاهرة المشكلة
Improper PESU injection speed; balance between fast requirements and defect risks.
تحليل الأسباب
PESU recommends fast injection; fast filling of high-viscosity material reduces front cooling; but too fast causes shear and trapped air; multi-stage injection requirements; structural adaptation.; during on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based only on experience
الحل
①Injection speed mainly fast; ②multi-stage curve optimization; ③shear and trapped air monitoring; ④structural adaptation adjustment.; after adjustment, continuously sample to verify the effect, and resume mass production after confirming stability
الخلاصة الأساسية
PESU fast injection is the official recommendation; multi-stage management prevents side effects; monitoring ensures quality.; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!