Extrusion & Post
13 مشاهدة
PET Bottle Pearlescence (Stress Whitening)
ظاهرة المشكلة
Pearl-like white small circles appear locally on the bottle body, mostly on the inner side of the bottle, with high occurrence at the shoulder/bottom.
تحليل الأسباب
When PET is over-stretched, the microstructure ruptures producing stress whitening (pearlescence); areas with large wall thickness but low temperature have high stretching resistance, and whitening occurs once the natural stretch ratio is exceeded.
الحل
①Increase the heating lamp power of the corresponding zone (raise the upper-layer lamps for the shoulder, the middle-layer lamps for the body, and the lower-layer lamp temperature for the bottom); ②for thin-wall whitening zones, lower the temperature and transfer the heat to adjacent zones; ③check preform wall thickness and heating matching; ④optimize stretch rod speed and blowing timing.
الخلاصة الأساسية
Pearlescence = cold stretching; give the heat to the whitening area.
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!