Molding Process
13 مشاهدة
PMMA Adhesive Selection
ظاهرة المشكلة
Using the wrong adhesive causes the sheet to crack, or insufficient bonding strength causes debonding
تحليل الأسباب
Solvent-type and polymer-type adhesives have better adhesion than contact-type adhesives; when internal stress has not been relieved, solvents cause stress cracks; methylene chloride, polymer, and epoxy types are suitable for PMMA
الحل
①Temper at 60-90℃ to relieve stress before bonding; ②select solvent-type or polymer-type special adhesives; ③contact-type adhesives are only used for low-stress temporary fixing; after adjustment, take samples continuously to verify the effect, and resume mass production only after confirming stability
الخلاصة الأساسية
For PMMA bonding, relieve stress before selecting the adhesive; solvent-type gives the best effect, but the premise is proper annealing; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!