Thermoforming
6 مشاهدة
Thickness fluctuation of PP extruded sheet
ظاهرة المشكلة
The transverse thickness deviation of the sheet is large, and the wall thickness of subsequent thermoformed products is uneven.
تحليل الأسباب
Uneven die lip gap or uneven die temperature distribution; extrusion output fluctuation is also transmitted as thickness fluctuation.; during on-site investigation, verify item by item according to this mechanism to avoid blindly adjusting the machine based only on experience
الحل
①Precisely adjust the die lip gap; ②balance the die temperature; ③stabilize the extrusion output; ④online thickness measurement feedback adjustment.; after adjustment, continuously sample and verify the effect, and resume mass production after confirming stability
الخلاصة الأساسية
Sheet thickness uniformity determines the downstream forming quality; die lip precision and steady-pressure extrusion are the key.; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!