Injection Molding
6 مشاهدة
Multi-stage Injection for PS Products
ظاهرة المشكلة
Single-speed injection causes many defects.
تحليل الأسباب
Different filling stages require different speeds; multi-stage injection can balance appearance and internal stress.; During on-site troubleshooting, verify item by item according to this mechanism, avoiding blindly adjusting the machine based solely on experience
الحل
①Adopt a multi-stage injection profile; ②Low speed in the initial stage to prevent jetting; ③High speed in the middle stage for filling; ④Decelerate in the final stage to prevent overpacking.; After adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability
الخلاصة الأساسية
Multi-stage injection is a basic technology for precision PS molding; the profile design is customized according to the product.; After confirming effectiveness, solidify the parameters and practices into the work instructions to prevent recurrence
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!