Processing Machinery
5 مشاهدة
PVC Screw Low Compression Ratio
ظاهرة المشكلة
Processing PVC with a general-purpose screw caused uneven plasticization and frequent black specks; the problem disappeared after changing the material
تحليل الأسباب
The general-purpose 3:1 compression ratio screw shears too strongly, and PVC locally overheats and degrades in the compression section; the PVC-dedicated screw has a low compression ratio of 1.5-2.5:1, a long feeding section, and no mixing section, plasticizing by external heat rather than shear
الحل
①Select a PVC-dedicated low compression ratio 1.6-2.0:1 screw; ②chrome-plate the screw flights to prevent material sticking and retention; ③deep channel design to reduce shear; after adjustment, continuously sample to verify the effect, and resume mass production after confirming stability
الخلاصة الأساسية
The PVC screw is a dedicated part, not a general-purpose part; low compression ratio plus chrome-plated flights eliminate shear degradation from the hardware; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!