Material Drying
6 مشاهدة
PVC Bubble Troubleshooting
ظاهرة المشكلة
Bubble positions on PVC products are random
تحليل الأسباب
Three causes: moisture, degradation gas, entrapped air—PVC degradation gas accounts for a high proportion; during on-site troubleshooting, verify item by item according to this mechanism to avoid blindly adjusting the machine based only on experience
الحل
First check temperature and residence to rule out degradation; then check drying; finally check venting and back pressure; after adjustment, continuously sample to verify the effect, and resume mass production after confirming stability; change only one variable at a time and record parameter changes to facilitate locating effective measures
الخلاصة الأساسية
For PVC bubbles, check degradation first, then moisture; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a troubleshooting reference for similar problems in the future
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!