Extrusion & Post
12 مشاهدة
Connected pellets in EAA extrusion pelletizing
ظاهرة المشكلة
During EAA extrusion pelletizing, the pellets are connected to each other, not completely cut, forming a bead-string shape
تحليل الأسباب
EAA is soft, the cutter cuts in during pelletizing but elastic recovery makes the cut surfaces re-adhere; pelletizing water temperature too low <40°C, not fully solidified; cutter speed does not match the extrusion speed
الحل
1) Raise the pelletizing water temperature to 50-60°C, cut after full solidification; 2) Increase the cutter speed to ensure fast cutting; 3) Set the cutter clearance to 0.01-0.02mm to ensure clean cutting; 4) Use a rotary cutter instead of flat cutting to reduce connected pellets
الخلاصة الأساسية
Connected pellets are caused by elastic recovery and low-temperature pelletizing; high-temperature water cutting and fast cutting are the key
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!