Injection Molding
7 مشاهدة
Burning from mold venting in EVA '2079851475616104452
ظاهرة المشكلة
Insufficient venting in EVA injection mold causes air in cavity to be compressed and heated, leading to local burning
تحليل الأسباب
Mold vent groove area insufficient or position improper; injection speed too fast with air having no time to escape; air compressed to high temperature >200°C causing oxidative burning
الحل
1) Increase vent groove area with depth 0.02-0.03mm and width 5-10mm; 2) Set vent grooves at the last-fill area of the melt; 3) Reduce injection speed to reduce air compression; 4) Multi-stage injection with slow advancement for venting
الخلاصة الأساسية
Burning is caused by insufficient venting and high speed injection compressing air; increasing venting and reducing speed are key
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!