Injection Molding
7 مشاهدة
EVA surface orange peel texture
ظاهرة المشكلة
EVA product surface has orange-peel-like uneven texture with rough hand feel
تحليل الأسباب
Mold temperature too low <30°C; after the product surface rapidly cools and solidifies, the interior continues to shrink, causing surface unevenness; injection speed too low
الحل
1) Increase mold temperature to 40-50°C to delay surface solidification; 2) Appropriately increase injection speed; 3) Increase holding pressure to reduce internal shrinkage
الخلاصة الأساسية
Orange peel texture is caused by rapid cooling and solidification; increasing mold temperature and holding pressure are key
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!