Extrusion & Post
12 مشاهدة
Die Buildup and Carbon Deposit in PU Extrusion
ظاهرة المشكلة
After PU extrusion shutdown, a brown carbon deposit layer is found on the die inner wall; after restart, the product surface has black specks
تحليل الأسباب
PU oxidized, decomposed and carbonized from prolonged heating in the die stagnation zone; die not cleaned promptly at shutdown; extrusion temperature too high accelerating carbonization
الحل
1) Flush the die with pure PE for 3-5min before shutdown to remove PU residue; 2) Disassemble and clean the die immediately after shutdown; 3) Reduce extrusion temperature by 5-10°C to reduce carbonization tendency; 4) Optimize die flow channel to reduce stagnation zone dead corners
الخلاصة الأساسية
Die carbon deposit is caused by thermal oxidation and untimely cleaning; PE flushing and timely cleaning are key
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!