Injection Molding
7 مشاهدة
Oil Spots on PU Injection Molded Products
ظاهرة المشكلة
Oil spots appear on PU injection molded product surface after demolding, release agent residue or lubricant exudation
تحليل الأسباب
Release agent sprayed too much or unevenly distributed; PU internal lubricant stearic acid type exuding to the surface; mold lubricating oil seeping into the cavity
الحل
1) Reduce release agent amount or switch to dry-film release agent; 2) Use internal lubricant to replace external release agent; 3) Seal mold lubrication areas to prevent oil seeping into the cavity; 4) Clean the product surface to remove oil spots then test to identify the source
الخلاصة الأساسية
Oil spots are caused by external sources of release agent and lubricant; reducing release agent and sealing mold lubrication are key
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!