Injection Molding
5 مشاهدة
Compression molding is used to reduce warpage and internal stress but the parameters are set improperly
ظاهرة المشكلة
Compression molding is used to reduce warpage and internal stress but the parameters are set improperly
تحليل الأسباب
Compression timing too early, melt not filling the cavity
Compression timing too late, melt already solidified, compression ineffective
Compression force set improperly, too large flash, too small poor effect
Compression stroke set unreasonably
Cellulose acetate butyrate compression molding parameters need to differ from conventional injection
الحل
Start compression when the melt fills 90% of the cavity
Compression force 80-100MPa, adjusted according to the product
Reasonably set the compression stroke
Adjust compression parameters according to cellulose acetate butyrate characteristics
Compression molding can effectively reduce warpage
الخلاصة الأساسية
Compression molding requires precise timing and force control
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!