Extrusion & Post
12 مشاهدة
CEF extrusion film thickness uniformity poor
ظاهرة المشكلة
The transverse thickness deviation of the CEF extruded film is ±15%, exceeding the ±5% industry standard
تحليل الأسباب
The unreasonable runner design of the die causes the melt to flow unevenly in the wide die; the CEF melt has large elasticity and the extrusion swell is uneven; the air ring cooling is uneven
الحل
1) Adopt a coat-hanger die design to ensure uniform transverse flow; 2) Fine-tune the die gap ±0.02mm; 3) Optimize the air volume and angle of the air ring to make the cooling uniform; 4) Add a small amount of low-elasticity resin to reduce the swell difference
الخلاصة الأساسية
Film thickness uniformity needs to be synergistically optimized from three aspects: die design, gap adjustment and cooling
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!