Extrusion & Post
12 مشاهدة
Excessive Thermal Shrinkage of CMC Film
ظاهرة المشكلة
Thermal shrinkage of CMC film at 80°C is >12%, exceeding the 5% dimensional stability requirement
تحليل الأسباب
CMC extrusion orientation is released after heating, causing large shrinkage; CMC thermal expansion coefficient is large; film cooling freezes a large amount of orientation stress
الحل
1)Reduce extrusion draw ratio to reduce orientation freezing; 2)Film annealing at 60-80°C to release orientation stress; 3)Add 5-10wt% rigid resin to reduce thermal shrinkage; 4)Biaxial stretching process to balance orientation
الخلاصة الأساسية
Film thermal shrinkage is caused by orientation freezing; reducing draw ratio and annealing treatment are the key
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!