Molding Process
2 مشاهدة
Material Sticking to Sizing Sleeve of CMC Extruded Pipe
ظاهرة المشكلة
CMC extruded pipe sticks in the sizing sleeve, and longitudinal sticking marks appear on the inner wall
تحليل الأسباب
CMC is soft and easily adheres to metal surfaces; sizing sleeve inner wall is rough Ra>0.4μm; sizing sleeve cooling is insufficient and surface temperature is high, promoting adhesion
الحل
1)Polish sizing sleeve inner wall to Ra<0.2μm; 2)Fully water-cool the sizing sleeve with surface <30°C; 3)Pass lubricating water containing 0.1% silicone oil emulsion inside the sizing sleeve; 4)Apply a thin coating on the pipe surface to reduce adhesion
الخلاصة الأساسية
Sizing sleeve sticking is caused by elastomer adhesion characteristics; polishing and lubricating water are the key
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!