Processing Machinery
6 مشاهدة
DSTDP poor plasticization
ظاهرة المشكلة
DSTDP product shows unmelted particles, plasticization incomplete
تحليل الأسباب
Screw compression ratio insufficient <2.5, plasticizing pressure low; screw speed on the low side, shear insufficient; processing temperature on the low side
الحل
1) Select screw with compression ratio >3; 2) increase screw speed to increase shear; 3) raise processing temperature 5-10°C
الخلاصة الأساسية
Poor plasticization is caused by improper screw design; optimizing the screw and raising temperature are key
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!