Injection Molding
7 مشاهدة
MP injection molded products have oil spots
ظاهرة المشكلة
MP injection molded products show oil spots on the surface after demolding, mold release agent residue or lubricant exudation
تحليل الأسباب
mold release agent sprayed too much or unevenly distributed; MP internal lubricant stearic acid type exudes to the surface; mold lubricating oil seeps into the cavity
الحل
1) reduce mold release agent amount or switch to dry-film release agent; 2) use internal lubricant instead of external release agent; 3) seal mold lubrication points to prevent oil seeping into the cavity; 4) clean the product surface to remove oil spots then test the source
الخلاصة الأساسية
oil spots are caused by external sources of release agent and lubricant; reducing release agent and sealing mold lubrication are key
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!