Injection Molding
9 مشاهدة
POE injection molded product oil spots
ظاهرة المشكلة
POE injection molded product surface shows oil spots after demolding, mold release agent residue or lubricant exudation
تحليل الأسباب
Too much mold release agent sprayed or uneven distribution; POE internal lubricant stearic acid type exudes to the surface; mold lubricating oil seeps into the cavity
الحل
1) Reduce mold release agent dosage or switch to dry film release agent; 2) Use internal lubricant instead of external release agent; 3) Seal mold lubrication parts to prevent oil from seeping into the cavity; 4) Clean product surface to remove oil spots and then detect the source
الخلاصة الأساسية
Oil spots are caused by external sources of release agent and lubricant; reducing release agent and sealing mold lubrication are key
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!