Processing Machinery
6 مشاهدة
Large current fluctuation of low density polyethylene extruder
ظاهرة المشكلة
The extruder main motor ammeter reading fluctuates greatly, exceeding the normal range.
Current fluctuation reflects unstable screw torque, and may be a precursor of poor plasticization or mechanical failure.
تحليل الأسباب
(1) Improper barrel temperature setting; plasticizing zone temperature too low, large screw torque
(2) Hard impurities mixed into raw material
(3) Screw and barrel wear, increased clearance
(4) Uneven feeding, sometimes more sometimes less
(5) Severe filter screen clogging, large die head resistance
الحل
(1) Optimize barrel temperature, ensure plasticizing zone temperature at a reasonable value within the 160-220°C range
(2) Check raw material purity, install magnetic grate on the hopper
(3) Check screw and barrel wear, replace when necessary
(4) Ensure continuous and uniform feeding, prevent bridging
(5) Regularly replace filter screens, prevent clogging
الخلاصة الأساسية
Current fluctuation is caused by large plasticizing resistance or equipment problems; it needs to be solved from temperature control, raw material purity, and equipment maintenance.
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!