Extrusion & Post
9 مشاهدة
Bending deformation of general-purpose polyethylene extruded pipes
ظاهرة المشكلة
The pipe bends after extrusion, and the straightness is out of tolerance.
Bending deformation affects the installation and use of the pipe, and is especially prominent in the production of long pipes.
تحليل الأسباب
（1）The cooling of each side in the extrusion direction is uneven, and the shrinkage is inconsistent
（2）The haul-off device is not concentric with the die
（3）The cooling water tank is installed incorrectly or the water temperature is uneven
（4）The pipe wall thickness is uneven, resulting in different shrinkage in all directions
（5）Improper support after extrusion, and the pipe's own weight causes bending
الحل
（1）Check the cooling system to ensure uniform cooling of each side of the pipe
（2）Adjust the center line of the haul-off device to align with the center of the die
（3）Correct the position of the cooling water tank and control the water temperature uniformly
（4）Adjust the concentricity of the die and the mandrel to ensure uniform wall thickness
（5）Add pipe support rollers to reduce self-weight deformation
الخلاصة الأساسية
Pipe bending is caused by non-uniform cooling or eccentric haul-off, and needs to be solved from cooling uniformity and equipment alignment.
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!