Injection Molding
13 مشاهدة
Premature Gate Freezing in PBT '2079851475616104452
ظاهرة المشكلة
The gate solidifies before the end of holding, and the shrinkage compensation channel is cut off, causing sink marks.
تحليل الأسباب
The gate size is too small or the mold temperature in the gate area is too low, causing PBT to crystallize and solidify rapidly.
الحل
Increase the gate diameter to ≥50% of the product wall thickness; increase the mold temperature in the gate area; delay the holding switchover.
الخلاصة الأساسية
Premature PBT gate freezing seriously affects the shrinkage compensation effect.
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!