Molding Process
7 مشاهدة
Poor adhesion of electroless plating on PET products
ظاهرة المشكلة
After electroless metal plating (copper, nickel) on the surface of PET products, the plating peels off and adhesion is unqualified.
تحليل الأسباب
The PET surface is not sufficiently roughened (insufficient chemical etching) and the anchoring effect is poor; surface activation is not in place.
الحل
Use chromic acid-sulfuric acid etching or alkali etching for roughening; optimize sensitization and activation parameters; select formulations suitable for plastic electroless plating.
الخلاصة الأساسية
The key to PET electroless plating lies in surface roughening and activation treatment.
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!