Extrusion & Post
6 مشاهدة
Excessive fuzz after PET fiber drawing
ظاهرة المشكلة
After PET spinning and drawing, a large amount of fuzz and broken filaments appear on the fiber surface, affecting weaving.
تحليل الأسباب
Drawing temperature is on the low side; excessive stress produces micro-cracks; drawing roller surfaces are rough or damaged; oil agent is insufficient or uneven.
الحل
Appropriately increase drawing temperature (Tg+10~30°C); check and polish drawing rollers; ensure uniform oil agent application.
الخلاصة الأساسية
PET fiber fuzz originates from fiber surface damage during the drawing process.
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!