Injection Molding
7 مشاهدة
PETG '2079851475616104452 poor venting, burning
ظاهرة المشكلة
Burnt black spots appear at the end or thin-wall areas of PETG injection molded products.
تحليل الأسباب
Poor cavity venting, air is compressed and heated scorching the material, injection speed too fast and air has no time to escape.
الحل
Deepen the vent groove depth to 0.02-0.03mm; reduce injection speed; add parting line venting; use vacuum venting.
الخلاصة الأساسية
PETG burning is caused by air retention; improving venting is the most direct measure.
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!