Excessive Release Agent

The surface of the part is sticky or coating is poor. When demolding is difficult, a "hissing" adhesion tearing sound can be heard at the moment of mold opening, whitening or tearing marks appear on the part surface, and obvious ejector whitening or dents occur at the ejector pin positions. In severe mold sticking, part of the material remains in the cavity and requires shutdown for manual cleaning, which not only prolongs the production cycle but may also damage the cavity surface. For multi-cavity molds, sticking in individual cavities can also cause abnormal filling of the remaining cavities.

1. Mold design factors: excessive release agent spraying, improper release agent type, low mold temperature causing the release agent not to form a film. 2. Mixing quality factors: in the RIM process, the mixing uniformity of the two components is the foundation of all quality; the Reynolds number of the mixing head, the impingement mixing energy, and the residence time distribution are the key engineering parameters determining mixing quality.

1. Process parameter optimization and adjustment: reduce release agent dosage, select a suitable release agent type, increase mold temperature so that the release agent forms a uniform film. 2. Systematic troubleshooting method: RIM problem troubleshooting follows the order of "formulation -> mixing -> temperature control -> equipment". First check the two-component ratio and catalyst dosage, then check the mixing head and self-cleaning function, then check the raw material and mold temperature control, and finally check the accuracy of the metering pump and hydraulic system. 3. Preventive management: establish standardized process parameter cards and quality control limits for each mold/product, and regularly conduct process capability index (CPK) evaluation. For recurring problems, use fishbone diagram or 5Why analysis to trace the root cause, and fix the countermeasures as PFMEA control points.

This problem is a typical manifestation of excessive release agent in the RIM process; the core of the solution lies in ensuring the precise ratio and full mixing of the two components, while controlling the reaction temperature and curing conditions within the optimal window. It is recommended to start troubleshooting from the mixing system and metering accuracy.