Molds & Tooling
2 Aufrufe
EVA Foaming Surface Defects
Problembeschreibung
Pits, broken holes or sticking appear on the surface of foamed products.
Ursachenanalyse
Poor mold surface condition or improper use of release agent; foaming gas breaks through the surface layer to form broken holes.; During on-site troubleshooting, verify item by item according to this mechanism to avoid blindly adjusting the machine based only on experience
Lösung
①Maintain the mold surface; ②standardize the use of release agent; ③optimize the matching of foaming pressure and temperature; ④check the mold venting.; After adjustment, continuously sample to verify the effect, and resume mass production after confirming stability
Wichtigste Erkenntnis
Surface quality relies on the matching of mold condition and foaming parameters; the broken hole problem requires controlling the foaming rate.; After confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!