Extrusion & Post
3 Aufrufe
EVA Photovoltaic Busbar Bending
Problembeschreibung
After lamination, the busbars bend and deform inward.
Ursachenanalyse
During lamination, gas gathers at the busbar position; when the rubber plate presses down to exhaust, this gap needs to be filled by EVA, and the flowing EVA bends the busbar; EVA shrinkage also aggravates it.
Lösung
①Extend the vacuuming time; ②reduce the lamination pressure; ③select materials with suitable fluidity; ④optimize the layup exhaust path.; After adjustment, continuously sample to verify the effect, and resume mass production after confirming stability
Wichtigste Erkenntnis
Busbar bending is a coupling problem of exhaust and material fluidity; vacuum time and lamination pressure are the main adjustment parameters.; After confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!