Material Drying
3 Aufrufe
Four-Dimensional Troubleshooting of LCP '2079851475616104452 Bubbles
Problembeschreibung
【Problem Phenomenon】Bubbles repeatedly appear inside or on the surface of LCP products, and single machine adjustment cannot cure them
Ursachenanalyse
Bubble causes are divided into four categories: poor mold venting, insufficient '2079851475616104451, degradation from too high molding temperature, and excessive machine shear; Aibang literature proposes the mold/material/molding conditions/machine four-dimensional troubleshooting method
Lösung
Troubleshoot in the four-dimensional order: first measure drying and dew point, then verify the actual melt temperature, then check venting and gate, and finally evaluate screw shear and back pressure; after verifying item by item to locate the main cause, solidify the parameters
Wichtigste Erkenntnis
For LCP bubbles, use the mold-material-process-machine four-dimensional method to eliminate item by item; avoid changing multiple things at once; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!