Extrusion & Post
3 Aufrufe
LDPE Film Wrinkles
Problembeschreibung
Longitudinal and transverse wrinkles appear on the wound film surface, and some wrinkles cannot be smoothed out.
Ursachenanalyse
Uneven die head installation, off-center collapsing frame and haul-off rolls, and non-level nip rolls are mechanical causes; film bubble deformation, improper cooling and inconstant tension are process causes.
Lösung
①Correct die head levelness and alignment of all parts; ②adjust the collapsing frame opening angle to match the bubble tube diameter; ③stabilize the film bubble and cooling; ④adjust winding tension to be constant.; after adjustment, take continuous samples to verify the effect, and resume mass production only after confirming stability
Wichtigste Erkenntnis
Wrinkle troubleshooting goes mechanical first and process second; alignment correction can solve most stubborn wrinkles.; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!