Processing Machinery
3 Aufrufe
LDPE Film Air Volume and Pressure Setting
Problembeschreibung
The bubble is under-cooled or trembling; it improves after adjusting air volume and pressure to the recommended range.
Ursachenanalyse
Air volume and pressure deviate from the empirical ranges of 60~80% and 0.3~0.6MPa; improper air ring position relative to the die also affects cooling efficiency.; During on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based only on experience.
Lösung
①Set air volume at 60~80% and air pressure at 0.3~0.6MPa; ②Fine-tune the air ring position 50~100mm from the die; ③Observe bubble shape for verification; ④Record the optimal settings.
Wichtigste Erkenntnis
Air volume and pressure have mature empirical ranges; fine-tuning based on them can quickly stabilize the bubble.; After confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!