Extrusion & Post
2 Aufrufe
LLDPE Blown Film Melt Fracture
Problembeschreibung
The film surface is overall orange-peel-like and thread-like rough, more severe than sharkskin.
Ursachenanalyse
The outlet shear rate far exceeds the critical value, and the melt becomes overall unstable; low die temperature and excessive output are the main causes.
Lösung
① Reduce output/line speed; ② raise the die temperature; ③ enlarge the die lip gap to reduce shear; ④ use PPA; ⑤ check whether there are abrupt changes in the die flow channel.
Wichtigste Erkenntnis
For melt fracture, first reduce shear, then raise temperature.
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!