Processing Machinery
2 Aufrufe
PA66 high-temperature carbonization black specks
Problembeschreibung
Black specks on products, obvious on light-colored parts.
Ursachenanalyse
Processing above 270℃, retained material in dead corners carbonizes quickly; incomplete material changeover; high-temperature nylon has high carbonization risk; during on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based solely on experience.
Lösung
①Clean retained carbonized material in dead corners of the barrel, nozzle and hot runner; ②avoid high-temperature idle running; ③thoroughly purge during material changeover; ④establish a regular machine cleaning and maintenance system to prevent material accumulation in dead corners; ⑤check cleanliness of virgin material and regrind to eliminate contamination sources.
Wichtigste Erkenntnis
PA66 black specks='dead corner carbonization': high-temperature nylon dead-corner material carbonizes extremely fast; machine cleaning and shutdown management must be stricter than ordinary nylon; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence.
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!