Material Drying
3 Aufrufe
PA6 Post-Drying Conveying Moisture Protection
Problembeschreibung
Qualified dried PA6 shows moisture exceeding the standard again after being conveyed to the machine via open conveying
Ursachenanalyse
Dried PA6 above 80°C is in a strongly hygroscopic state, and exposure to humid air for a few minutes can re-absorb a large amount of moisture; open screw conveying or manual transfer causes the dried material to re-absorb moisture
Lösung
Dried material is conveyed to the machine via enclosed pipelines with hot-air insulation, or the drying hopper is installed directly above the '2079851475616104452 machine for drying and immediate use; the transfer process is controlled within 10 minutes and uses enclosed containers
Wichtigste Erkenntnis
Post-drying moisture protection is as important as drying itself, and enclosed conveying is the key to preventing moisture re-absorption; after confirming effectiveness, fix the parameters and practices into the work instructions to prevent recurrence
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!