Extrusion & Post
2 Aufrufe
PBAT melt index too low and processing difficult
Problembeschreibung
PBAT melt flow index is too low, plasticization is difficult, extrusion pressure is high, and output is limited.
Ursachenanalyse
PBAT molecular weight too high or crosslinked; plasticization temperature insufficient; screw shear insufficient; filler addition too high; lubricant insufficient.; when troubleshooting on site, verify item by item according to this mechanism, and avoid blindly adjusting the machine based only on experience
Lösung
①Increase plasticization temperature; ②optimize screw shear; ③add lubricant to improve flow; ④control filler addition; ⑤evaluate grade change.; after adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability
Wichtigste Erkenntnis
Temperature and shear adjustment are the main means for PBAT melt index too low; lubricant is auxiliary; grade selection is fundamental.; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!