Molds & Tooling
2 Aufrufe
PBT product mold sticking
Problembeschreibung
Products stick to the core and demolding is difficult.
Ursachenanalyse
Low mold temperature and large gripping force; insufficient draft angle or rough surface.; when troubleshooting on site, verify item by item according to this mechanism, and avoid blindly adjusting the machine based only on experience; this mechanism has been repeatedly verified by industry data and should be confirmed first when troubleshooting
Lösung
①Appropriately increase mold temperature; ②increase draft angle; ③polish the cavity; ④balanced ejection.; after adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability
Wichtigste Erkenntnis
Solve mold sticking from both the gripping and structure ends.; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a troubleshooting reference for similar problems in the future
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!