Molds & Tooling
2 Aufrufe
PC Black Specks (Carbonized Spots)
Problembeschreibung
Small black specks appear in transparent or light-colored PC parts, randomly distributed, zero tolerance on transparent parts.
Ursachenanalyse
Material accumulated in hot runner dead corners and barrel dead corners carbonizes and falls off at high temperature; incomplete purging during material change and raw material contamination also introduce black specks; PC's high processing temperature makes dead-corner accumulated material easier to carbonize.
Lösung
①Clean hot runner and nozzle dead corners; ②Avoid long shutdowns with heat preservation; ③Use purging material to thoroughly replace during material change; ④Check raw material cleanliness; ⑤Establish a regular purging and maintenance system.
Wichtigste Erkenntnis
Transparent PC's tolerance for black specks is zero: dead-corner treatment must be normalized and institutionalized; intermittent black specks are a typical feature of dead-corner carbon deposits, and purging is far more effective than adjusting the process.
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!