Processing Machinery
2 Aufrufe
PC/ABS melt temperature too high degradation
Problembeschreibung
Parts yellow and embrittle, performance declines.
Ursachenanalyse
Polymer degrades when melt temperature exceeds 300℃; validated setpoint deviations cause internal stress and mechanical property damage.; during on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based on experience alone
Lösung
①Control melt temperature within the 240~280℃ window; ②strictly prohibit exceeding 300℃; ③calibrate the thermocouple to measure the actual melt temperature; ④shorten the residence time.; after adjustment, take continuous samples to verify the effect, and resume mass production only after confirming stability
Wichtigste Erkenntnis
PC/ABS requires strict thermal management; 240~280℃ is the industry standard window, exceeding temperature means degradation.; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!