Extrusion & Post
2 Aufrufe
PC UV Yellowing and Aging
Problembeschreibung
[Problem Phenomenon] PC outdoor parts yellow and chalk, with insufficient weather resistance
Ursachenanalyse
PC has poor UV resistance and undergoes photo-oxidative yellowing under ultraviolet light; outdoor applications must add UV stabilizers or coatings; when troubleshooting on site, verify each item according to this mechanism one by one, and avoid blindly adjusting the machine based on experience alone
Lösung
Select weather-resistant grades or coatings for outdoor parts; xenon lamp aging verification; avoid long-term unprotected exposure to the sun; after adjustment, take samples continuously to verify the effect, and resume mass production only after confirming stability
Wichtigste Erkenntnis
PC fears UV; outdoor parts must have stabilizers or coatings; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a reference for troubleshooting similar problems in the future
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!