Injection Molding
5 Aufrufe
PET Preform Injection Short Shot
Problembeschreibung
Material shortage at the end of the preform (neck side).
Ursachenanalyse
Insufficient injection pressure/speed, poor venting; PET melt viscosity is relatively high, and thin-wall long-flow preforms are prone to short shots.
Lösung
①Increase pressure and speed; ②venting; ③check melt temperature; ④check hot runner temperature.
Wichtigste Erkenntnis
Preform short shot = pressure and venting.
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!