Injection Molding
2 visualizações
PET Preform Injection Short Shot
Fenómeno do problema
Material shortage at the end of the preform (neck side).
Análise das causas
Insufficient injection pressure/speed, poor venting; PET melt viscosity is relatively high, and thin-wall long-flow preforms are prone to short shots.
Solução
①Increase pressure and speed; ②venting; ③check melt temperature; ④check hot runner temperature.
Conclusão principal
Preform short shot = pressure and venting.
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!