Injection Molding
5 Aufrufe
PET Preform Neck White Spot Crystallization
Problembeschreibung
White crystallization spots appear on the threaded neck of the preform, affecting the neck appearance and sealing fit; after blowing, the white spot area is still white.
Ursachenanalyse
Too slow injection speed causes the melt front to cool and crystallize at the neck; sudden injection speed changes, melt viscosity too high or low mold temperature at the neck area all make the melt unable to fill quickly.
Lösung
①Increase injection speed to avoid front cooling; ②keep the injection speed curve stable; ③appropriately raise the melt temperature to reduce viscosity; ④raise the mold temperature in the neck area.
Wichtigste Erkenntnis
Neck white spots reflect improper filling speed or temperature management; the neck no longer deforms in the blowing process, and defects from the injection stage are retained as-is, so they must be controlled at the source.
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!