Material Drying
2 Aufrufe
PET rainy season drying
Problembeschreibung
In the plum rain season, the PET white haze defect rate rises several-fold
Ursachenanalyse
High environmental humidity raises the initial moisture content of the chips and increases the load on the dryer, leaving insufficient margin under conventional conditions; during on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based only on experience
Lösung
In the plum rain season, extend drying by 1-2 hours and increase the frequency of moisture content testing; dehumidify the workshop and material warehouse; increase the frequency of dew point monitoring; after adjustment, take consecutive samples to verify the effect, and resume mass production only after confirming stability
Wichtigste Erkenntnis
In high-humidity seasons, both the drying standard and the monitoring frequency are upgraded; after confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a troubleshooting reference for subsequent similar problems
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!