Molds & Tooling
2 Aufrufe
PLA product sticking to mold
Problembeschreibung
Products stick to the mold.
Ursachenanalyse
PLA's hot tack interacts with the mold surface; high mold temperature or insufficient draft.; during on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based only on experience; this mechanism has been repeatedly verified by industry data and should be confirmed first during troubleshooting
Lösung
① Appropriately lower mold temperature; ② increase demolding draft; ③ polish or texture the mold surface; ④ standardize release agent.; after adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability
Wichtigste Erkenntnis
Mold sticking is solved from temperature and structure.; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence; include this case in the defect archive as a reference for troubleshooting similar problems in the future
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!