Material Drying
2 Aufrufe
PLA Sheet Extrusion Moisture
Problembeschreibung
PLA sheet extrusion has many bubbles and embrittlement, and ordinary drying systems cannot meet the requirements
Ursachenanalyse
PLA sheet extrusion requires moisture <50ppm, with extremely high requirements for drying and temperature control systems; the thickness is generally only 0.2-1.0mm; it needs to be processed on modified advanced PET extruders
Lösung
①Sheet extrusion moisture control <50ppm; ②Use a PET-type extrusion line with deep dehumidification; ③Design the thickness per the 0.2-1.0mm window; after adjustment, take continuous samples to verify the effect, and resume mass production only after confirming stability
Wichtigste Erkenntnis
PLA sheet extrusion is the ultimate challenge of drying capability; the 50ppm red line determines the equipment threshold; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!