Material Drying
2 Aufrufe
PPSU extruded profiles
Problembeschreibung
PPSU extruded profiles have bubbles or streaks; insufficient drying or improper process.
Ursachenanalyse
PPSU extrusion with wet resin causes severe blistering or streaks; moisture content <100ppm requirement is stricter; melt temperature uniform; mold design; cooling control.; During on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based solely on experience
Lösung
①Extrusion drying <100ppm; ②uniform melt temperature; ③mold temperature management; ④cooling optimization; ⑤online inspection.; After adjustment, continuously sample to verify the effect, and resume mass production only after confirming stability
Wichtigste Erkenntnis
The 100ppm of PPSU extrusion is a stricter standard; uniformity management runs throughout; inspection ensures quality.; After confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!