Extrusion & Post
10 Aufrufe
PVC Profile Co-extrusion Layer Peeling
Problembeschreibung
Co-extruded surface layer and substrate delaminate and peel, affecting appearance and protective function.
Ursachenanalyse
Two-layer material formula/plasticization state mismatch, insufficient interface temperature; poor co-extruder synchronization; insufficient interface bonding is the essence; during on-site troubleshooting, verify item by item according to this mechanism, avoid blindly adjusting the machine based solely on experience.
Lösung
①Match formula and melt temperature of the two layers; ②Increase interface bonding temperature to promote fusion of the two layers; ③Synchronize extrusion speed of co-extrusion layers to ensure interface stability; ④Check co-extrusion die head condition; ⑤Optimize interface design to improve two-layer bonding strength.
Wichtigste Erkenntnis
PVC co-extrusion peeling = 'interface temperature and matching': the two layers must be fused in place with good synchronization; co-extrusion interface bonding is the core, formula and temperature must match.
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!