Extrusion & Post
9 Aufrufe
Unstable feeding in EAA extrusion
Problembeschreibung
The feeding amount of EAA extrusion fluctuates ±15%, causing unstable extrusion pressure and product dimensions
Ursachenanalyse
Irregular shape of EAA granules causes unstable filling rate of the feeding screw; bridging or voids in the hopper; unsuitable feeding screw design
Lösung
1) Use a loss-in-weight feeder to precisely control the feeding amount; 2) Install a vibrator on the hopper to prevent bridging; 3) Granulate EAA to a uniform particle size of 2-3mm; 4) Change the feeding screw to a dedicated design
Wichtigste Erkenntnis
Unstable feeding is caused by granule characteristics; loss-in-weight feeding and anti-bridging are the core
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!