Injection Molding
2 Aufrufe
Severe EMA internal stress concentration
Problembeschreibung
EMA product internal stress >15MPa causes cracking during storage
Ursachenanalyse
Injection speed too fast causing large orientation stress; uneven cooling freezing thermal stress; improper gate position causing concentrated flow orientation
Lösung
1) Reduce injection speed to reduce orientation; 2) Uniform mold temperature to reduce thermal stress; 3) Anneal at 80°C/4h to release stress; 4) Optimize gate position
Wichtigste Erkenntnis
Internal stress is caused by fast injection and uneven cooling; speed reduction, uniform cooling and annealing are key
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!